Bimba Valves (4MV8) General User Manual

Browse online or download User Manual for Measuring instruments Bimba Valves (4MV8) General. Bimba Valves (4MV8) General User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 1
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
Assembly Instructions
Manual Valves
General Repair Instructions
K-B-3MV8, K-B-4MV8
Bimba Manufacturing Company
Monee, IL 60449-0068
Telephone: 708.534.8544
Fax: 708.235.2014
www.bimba.com
To learn more about this
product, scan this QR code
with your mobile device.
Disassembly
1) Secure the Valve Body onto a table top
2) Unthread the Lever from the Rotor and set it aside.
3) Using snap ring pliers, carefully remove and discard the Retaining Ring (use extreme caution,
contents are pressurized with spring force).
4) Remove the Rotor from the Valve Body, it can be discarded.
5) Remove the Buttons and O-Rings from the Valve Body (2 for 3MV8 and 3 for 4MV8), they can be
discarded.
6) Remove the Springs from the Valve Body (2 for 3MV8 and 3 for 4MV8), they can be discarded..
Reassembly
1) With the Valve Body still secured onto the table top, swab the internal holes of the Valve Body
(2 for 3MV8 and 3 for 4MV8) with applicable lubrication.
2) Place the new Springs into the internal holes of the Valve Body.
3) Lightly lubricate the new O-Rings with applicable lubrication and install them onto the new
Buttons.
4) Lightly lubricate the Button/O-Ring subassemblies with applicable lubrication.
5) Install the Button/O-Ring subassemblies on top of the springs inside the Valve Body (be sure the
button is facing thick side up as shown).
6) Lightly lubricate the face of the Rotor that has air holes in it with applicable lubrication.
7) Carefully install the Rotor into the Valve Body, ensure the tapped hole on the side of the Rotor
lines up with the slot on the side of the Valve Body.
8) A press may need to be used to compress the assembly. Once the Rotor is fully depressed,
carefully install the new Retaining Ring using snap ring pliers.
9) Thread the Lever Arm back into the threaded hole on the side of the Rotor.
TOP
RETAINING RING
LEVER
BALL
VALVE BODY
SPRING
BUTTON
ROTOR
O-RING
FIGURE 1 - 3MV8
RETAINING RING
ROTOR
SPRING
VALVE BODY
BALL
LEVER
BUTTON
O-RING
FIGURE 2 - 4MV8
TOP
Form: BMS-1018
rev. 1: EC-37763
Page view 0
1

Summary of Contents

Page 1 - FIGURE 2 - 4MV8

Assembly InstructionsManual Valves General Repair InstructionsK-B-3MV8, K-B-4MV8Bimba Manufacturing Company Monee, IL 60449-0068 Telephone: 708.534.

Related models: Valves (3MV8) General

Comments to this Manuals

No comments